10 COMMON MISTAKES BEGINNERS MAKE WITH GEL BLASTERS
Starting out in the world of Gel Blasters is exciting — but many beginners make the same mistakes that reduce performance, damage their blaster, or ruin their gameplay experience. Whether you’re using a gel blaster sniper, a compact orby gun glock, or a heavy-duty rifle, avoiding these common errors will help you get the most out of your gear.
Here are the 10 most common mistakes beginners make with Gel Blasters — and how to fix them.
1. Using Poor-Quality Gel Balls
Cheap or incorrectly sized gel balls are the #1 cause of jams, low accuracy, and poor FPS.
Best Practice
Use high-quality, branded gel balls and hydrate them correctly. Premium ammo reduces jams and improves range and consistency.
2. Not Hydrating Gel Balls Properly
Under-hydrated or over-soaked gel balls affect accuracy and can damage the internals of the blaster.
Correct Hydration Method
Soak gel balls in clean water for 3–4 hours (or according to instructions) until they reach the correct size.
3. Neglecting Basic Maintenance
Many beginners never clean their blaster — leading to jams, inaccurate shots, and wear.
Maintenance Checklist
• Clean the barrel after every session
• Remove unused gel balls from the mag
• Wipe the blaster dry before storing
A clean blaster shoots better and lasts longer.
4. Using the Wrong Battery or Overcharging It
Incorrect batteries can damage your blaster or reduce performance. Overcharging shortens battery life.
Safe Battery Use
Use the recommended battery type and a smart charger.
If using Li-Po: never leave charging unattended and store at 50–60% when not in use.
5. Storing Gel Blasters Loaded and Ready
Some beginners store their blaster with gel balls inside the magazine or chamber, which leads to swelling, mold, and feeding issues.
Proper Storage Habit
Always empty the magazine and dry it before storage.
6. Playing Too Close Without Safety Rules
Even though gel balls are soft, firing at close range can hurt or cause eye injuries.
Safety First
• Always wear eye protection
• Follow a minimum engagement distance (2–3 meters / 6–10 ft)
Safety keeps the game fun for everyone.
7. Upgrading Too Soon
Beginners often jump into upgrades before they understand how their blaster works — and end up breaking it.
When to upgrade
Play with your blaster in stock form first. Upgrade slowly and safely once you understand your needs (e.g., hop-up, barrel, battery).
8. Using Improper Lubricants
Some players spray WD-40 or oils that damage plastic components and seals.
What to Use Instead
Only use silicone-based lubricants designed for gel blasters or airsoft.
9. Ignoring Storage Conditions
Leaving your blaster outside, in a car, or in humid areas can warp plastic and damage electronics.
Ideal Storage Conditions
Store in a cool, dry place — ideally in a tactical bag or protective case.
10. Expecting It to Work Like Airsoft or Nerf
Beginners often expect Gel Blasters to behave exactly like Airsoft or Nerf guns. Gel Blasters are unique and require different handling.
Tip
Learn gel-specific care: hydration, cleaning, and correct use. With proper care, your blaster’s performance will increase dramatically.
Bonus Tip: Not Reading the Manual
Yes — the manual is boring, but it explains the exact requirements of your model. Many preventable issues are solved instantly by checking it.
Conclusion
Gel Blasters are fun, safe, and highly engaging — but only if used correctly. Avoiding these common beginner mistakes will help you improve performance, protect your blaster, and enjoy smoother gameplay.
Start with good ammo, maintain your blaster, store it properly, and learn before upgrading. Master the basics and you’ll be playing like a pro in no time.